Gull Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   8am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
SolarFix 30m Solar Panel Bird Exclusion Kit
Click image to enlarge
  • SolarFix keeps pigeons and other pest birds out from under solar panels on pitched roofs
  • Everything you need to treat 30m of solar panels save 15% on component prices
  • SolarFix kit includes wire mesh, specialist SolarFix retaining clips and cutting tool
  • 100% effective when properly installed, better than using spikes, chicken mesh or repellent gels
  • Does not pierce roof or solar panel, no leaks no warranty issues with panels
  • Fast and easy to install, no gluing or drilling necessary.

Specification

For this kit to work the solar panel must have a minimum 20mm return lip on the underside of the frame.

SolarFix Kit Contents:

  • 1 x Solar Panel Weldmesh Roll in Galvanised or Stainless Steel
  • 60 x SolarFix Panel Mesh Clips
  • 1 x Standard Wire Cutters
  • 20 x Corner Zip Ties

SolarFix Galvanised Steel Weldmesh Spec:

  • Manufactured from: 16 gauge / 1.60 mm diameter European Grade A Hot Dipped Galvanised wire.
  • Mesh Size: 25mm X 25mm (1" X 1")
  • Roll Width: 200mm (0.66')
  • Roll Length: 30m (100')

SolarFix Stainless Steel Weldmesh Spec:

  • Manufactured from: 19 gauge / 1.00 mm diameter European Grade A 304 stainless steel wire.
  • Mesh Size: 25mm X 25mm (1" X 1")
  • Roll Width: 250mm (1')
  • Roll Length: 30m (100')

SolarFix Solar Panel Clips Specs:

  • Where to Use: Rooftop solar panel arrays
  • Target Bird: All species
  • Bird Pressure: All levels
  • Material: U.V.-stabilized polycarbonate
  • Installation: Wire mesh is bound to solar panels using patent-pending clips
  • Expertise Level: Easy

Usage

For the SolarFix kit to work the solar panel must have a minimum 20mm return lip on the underside of the frame.

Solar panels are being installed on commercial and residential roofs across the United Kingdom at an ever-increasing rate. These arrays provide perfect harbourage for birds, and homeowners are desperate for a solution that does not involve piercing or damaging the solar panels with mechanical fixings or adhesives, hence avoiding warranty infringements.

This innovative system is designed specifically to keep all birds from getting under solar arrays, protecting the roof, wiring, and equipment from damage.

A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge. See the diagram attached to this product listing for more details and an example of a typical installation.

This non-penetrating system is fast and easy to install, and can be removed for service.

STEP 1: Place clips every 450mm / 18 inches. Slide the clip onto the underside edge of the panel support bracket. Slide as far outward as possible so the clip is all the way on the lip of the panel.

STEP 2: Set the wire mesh screen in place. Make sure the fastener rod comes through the screen at an upward angle as to keep downward pressure on the screen, pushing it towards the roof.

STEP 3: Slide the speed washer onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten speed washer to panel edge.

Include a 75mm (3inch) overlap of the mesh when installing the next section.

STEP 4: Cut off any excess mesh screen sticking over the top edge of the solar panel array. Cut of the clip assembly rod flush with the exterior of the speed washer. Use either our budget or professional wire cutters NT119 or NT120 respectively.

Instructions and Technical Guide

Installation Instructions

Installation Instructions

Technical Specification

Technical Specification

SolarFix 30m Solar Panel Bird Exclusion Kit - Galvanised Steel (WM134)199.99Each ex.VAT
SolarFix 30m Solar Panel Bird Exclusion Kit - Stainless Steel (WM140)259.99Each ex.VAT
Similar Products
SolarFix - Solar Panel Mesh - 25mm X 25mm X 250mm X 30m 19G 304 Stainless Steel
From 99.78 30m Roll
SolarFix - Solar Panel Mesh Clips
From 2.99 Each
PestFix Standard Side Action Wire Cutter
From 13.99 Each
Netting Corner Tie 160mm x 100
From 3.31 100 Pack
Professional Felco C7 Side-Action Wire Cutters
From 61.98 Each
Guano Removal Tool Kit
From 26.71 Each
PPE Kit Professional - One Person Kit
From 32.07 Each
PPE Kit Standard - One Person Kit
From 9.32 Each