Gull Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   8am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Seagull Post and Wire Kits For Masonry
Seagull Post and Wire Kits For Masonry
Seagull Post and Wire Kits For Masonry
Click image to enlarge
  • Ideal for protecting masonry ledges, cornicing and parapets from pest seagulls
  • All metal components made in stainless steel or copper
  • Seagull Wire
  • 180mm Single Headed Seagull Posts
  • Gull Wire Micro Springs
  • 1.0mm Copper Crimps
  • Masonry Rivets
  • Screw Pins and Plugs
  • Crimp Tool and 6.5mm Straight Shank Masonry Drill Bit

Specification

Each kit contains the following:

15m Kit 30m Kit 60m Kit 90m Kit
Gull Wire 0.96mm 1 X 7 304 Stainless Nylon Coated 50m 100m 150m 200m
Gull Post 180mm Single Headed For Masonry 12 22 42 62
Grey Masonry Rivet 12 22 42 62
Gull Wire Micro Spring 10 20 40 60
Gull Wire 1mm Copper Crimp 100 100 100 200
Screw Pin and Wall Plug 4 4 4 4
6.5mm Masonry Drill Bit - Straight Shank 1 1 1 1
Bird Wire Crimp Tool 1 1 1 1

Usage

Maximum distance between gull wire posts = 3000mm (3m)

Gull wire should be spring-tensioned every 3000mm (3m) along its run, i.e. the wire should stop at a spring on each post and start with a newly crimped section of the other side of the post.

In doing so you are spreading the load evenly across the post system and avoiding spring overload

Do not thread the gull wire through the eyelets of the post and onwards to the next post, this will cause the system to sag and go out of shape.

The system should be counter-tensioned at the end of each run using the screw-pin and plugs provided. To avoid sagging of the system do not use springs in the counter-tension wires,

Instructions and Technical Guide

PestFix Post & Wire System Technical Specification

PestFix Post & Wire System Technical Specification

Installation guide

Installation guide

15m Seagull Post and Wire Kit For Masonry (PW265)50.17Each ex.VAT
30m Seagull Post and Wire Kit For Masonry (PW266)65.03Each ex.VAT
60m Seagull Post and Wire Kit For Masonry (PW267)90.71Each ex.VAT
90m Seagull Post and Wire Kit For Masonry (PW268)121.31Each ex.VAT