Gull Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   8am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop

Gull Grid Parallel Wire

For the Gull Grid Parallel Wire Roof Protection System.

Alternative to installing a roof net.

Uses:

  • Flat Roofs
  • Overhead on outdoor eating areas
  • Industrial shallow pitched roofs

Use the same mounts and perimeter straining wire / fixings as for a bird control net installation, but then fit a series of parallel wires using this 1.2mm Orange Wire Rope

Our Seagull Netting Fixing Kits are ideal fro installing the perimeter wire for the Gull Grid Parallel Wire System

The orange PVC coating provides extra visibility to gulls and increases the overall diameter to 1.5mm

Run parallel wires across the roof at 400mm centres and secure to perimeter wire rope with 2.5mm Copper Ferrules.

During perimeter wire rope installation slide enough Ferrules on to the perimeter straining wire before terminating and tensioning. However if you run short of ferrules then use Wire Rope Grips.

Allows maintenance staff to walk between or over the wires as it is installed lower, reducing the visual impact.

Parallel wires do not need to be tensioned and should ideally sag slightly to move in the wind for extra deterrence.

Orange PVC Coated Wire Rope 1.2mm 7X7 Strand Metres
Orange PVC Coated Wire Rope 1.2mm 7X7 Strand  Metres
  • For the Gull Grid Parallel Wire Roof Protection System
  • Run parallel wires at 400mm centres
  • Minimum height from ground/roof 500mm
  • Gulls will not be able to land between the wires
  • Use netting perimeter wire rope and fixings
  • Secured to perimeter using 2.5mm ferrules

Quantity Discounts

5 +  62.3510 +  59.07
More Information
Orange PVC Coated Wire Rope 1.2mm 7X7 Strand Metres (NF302)65.64100m Reel ex.VAT
2.5mm Copper Ferrules For 2mm Wire Rope Termination
2.5mm Copper Ferrules For 2mm Wire Rope Termination
  • Copper ferrules provide a permanent and professional finish to your netting installation's wire rope framework
  • These can be used with stainless steel 2mm diameter wire rope
  • Sold in packs of 100
  • You will require a Ratchet Ferrule Crimp Tool NT118 or NT143 to compress / swage the ferrules.

Quantity Discounts

5 +  8.9710 +  8.50
More Information
2.5mm Copper Ferrules For 2mm Wire Rope Termination (NF139)9.44100 Pack ex.VAT
Professional Felco C7 Side-Action Wire Cutters
Professional Felco C7 Side-Action Wire Cutters
  • Professional, Felco swiss-made side action cutters for cutting of wire rope up to 7mm in diameter
  • These cutters make light work of cutting quickly and neatly through our wire rope without blunting and without fraying.
  • Manufactured from hardened steel, ideal long term investment for the professional installer
  • Side cut action ensures that cables are clean-cut without any crushing or fraying
  • Can also be used for cutting Bird Wire, Gull Wire and Weld Mesh
More Information
Professional Felco C7 Side-Action Wire Cutters (NT119)61.98Each ex.VAT
1mm - 2.5mm Ferrule Ratchet Crimp Tool - Standard
1mm - 2.5mm Ferrule Ratchet Crimp Tool - Standard
  • Good quality Ferrule Crimping Tool
  • Used for crimping 2.5mm and 1.0mm ferrules onto netting wire rope or gull post & wire
  • Ratchet mechanism allows rapid, accurate one-handed powerful crimping
More Information
1mm - 2.5mm Ferrule Ratchet Crimp Tool - Standard (NT143)34.99Each ex.VAT
Wire Rope Reel Dispenser
Wire Rope Reel Dispenser
  • Specifically designed to hold wire reels for bird netting work
  • Allows you to pull off the wire as required
  • Prevents the wire from tangling
  • Stops the reels rolling away and can hang onto a rail
  • Saves installation time and frustration
More Information
Wire Rope Reel Dispenser (NT134)42.15Each ex.VAT
75mm Seagull Netting Fixing Kit For Masonry - Professional
75mm Seagull Netting Fixing Kit For Masonry - Professional
  • Save 15% on the price of individual fixings
  • All components are made from stainless steel
  • Contains all fixings for attaching a 10m x 10m seagull net to masonry
  • Designed for use with our professional range of netting tools
  • For larger nets multiple kits are required
More Information
75mm Seagull Netting Fixing Kit For Masonry - Professional (NFK75M-PRO)58.11Each ex.VAT
Netting Capital Bracket
Netting Capital Bracket
  • Used to prevent the net being damaged by any protruding features from a building or structure
  • Enables netting perimeter wire rope to be placed over the edges of parapets and ledges
  • 25 mm X 3mm stainless bracket in 200, 350 & 500mm lengths
  • Netting perimeter wire can run horizontally or vertically through the bracket
  • The bracket contains either two three or four 8mm diameter fixing holes
More Information
Netting Capital Bracket 200mm - Stainless Steel (NF305-200)3.99Each ex.VAT
Netting Capital Bracket 350mm - Stainless Steel (NF305-350)4.99Each ex.VAT
Netting Capital Bracket 500mm - Stainless Steel (NF305-500)5.99Each ex.VAT